Manufacturer of custom machined bronze parts

Cast C90800

Tin bronze alloys, such as C90800, are typically found in gear, high-strength bushing and bearing applications where low speeds and heavy loads are present. Other high-strength applications for these alloys include pump impellers, piston rings, steam fittings and valve bodies. C908 tin bronze castings are utilized in movable bridge components, turntables for bridges and other structures for fixed and expansion bearings with slow or intermittent movement with heavy loads.

Information

Product description: Tin bronze
Solids: 1” to 6” O.D.
Tubes: 1” to 6” O.D.
Rectangles: Up to 10”
Standard lengths: 144”
Shape/Form: semi-finished, mill stock or near-net shapes, anode, bar stock, billet/bloom, squares, hex, plate, profile or structural shape, flats/rectangular bar
Compliance: C90800 is compliant with key legislation including (1) Federal Safe Drinking Water Act 1974 - SDWA, (2) Federal Reduction of Lead in Drinking Water Act 2011 and (3) California AB1953

Typical uses

Industrial: speed reducers, worm gears

Similar or equivalent specification

CDAASTMSAEAMSFederalMilitaryOther
C90800B427

Chemical composition

Cu%1Pb%Sn%Zn%Fe%P%Ni%2Al%S%Sb%Si%
85.00-89.000.2511.00-13.000.250.150.300.500.0050.050.200.005

¹In determining Cu min., Cu may be calculated as Cu + Ni. ²Ni value includes Co.
Note: Cu + sum of named elements, 99.4% min. Single values represent maximums.

Mechanical properties

Tensile strength, minYield strength, at 0.5% extension under load, minElongation, in 2 in. or 50 mm minBrinell hardness (500 kg load)Remarks
ksiMPaksiMPa%typical BHN
45310221521395

Mechanical properties according to ASTM B427-09(2015)

Ready for a quote?

Wieland Randall has a team of experts ready to assist you in selecting the proper materials and manufacturing your custom part.

Scroll to Top