Cast C89835
C89835 is a C932, C836 and C844 lead-free replacement alloy and is offered as a standard-stocked product. Randall Bearings maintains an inventory of this alloy numbering over 100 items and in sizes up to 5.0" O.D. C89835 supports the market demand for lead-free material and compliance with the S. 3874: Reduction of Lead in Drinking Water Act (effective January 2014).
Information
PRODUCT DESCRIPTION: Bismuth Tin Bronze
SOLIDS: 1/2” to 10” O.D.
TUBES: 1 1/8” to 9” O.D.
RECTANGLES: Up to 15”
STANDARD LENGTHS: 105”
SHAPE/FORM: semi-finished, mill stock or near-net shapes, anode, bar stock, billet/bloom, squares, hex, plate, profile or structural shape, flats/rectangular bar
COMPLIANCE: C89835 is compliant with key legislation including (1) Federal Safe Drinking Water Act 1974 – SDWA, (2) Federal Reduction of Lead in Drinking Water Act 2011 and (3) California AB1953
Typical Uses
PLUMBING: faucets, pump components, pipe fittings, plumbing goods, water pump impellers
INDUSTRIAL: housings, small gears
Chemical Composition
Cu% | Pb% | Sn% | Zn% | Fe% | P% | Ni%1 | Al% | Bi% | S% | Sb% | Si% |
---|---|---|---|---|---|---|---|---|---|---|---|
85.00-89.00 | 0.09 | 6.00-7.50 | 2.00-4.00 | 0.20 | 0.10 | 1.00 | 0.005 | 1.70-2.70 | 0.08 | 0.35 | 0.005 |
¹Ni value includes Co.
Note: Cu + Sum of Named Elements, 99.0% min. Single values represent maximums.
Machinability
Copper Alloy UNS No. | Machinability Rating | Density (lb / in³ at 68°F) |
---|---|---|
C89835 | 70 | 0.321 |
Mechanical Properties
Tensile Strength, min | Yield Strength, at 0.5% Extension Under Load, min | Elongation, in 2 in. or 50 mm min | Brinell Hardness (500 kg load) | Remarks | ||
---|---|---|---|---|---|---|
ksi | MPa | ksi | MPa | % | typical BHN | |
30 | 207 | 14 | 97 | 6 | 65 |
Physical Properties
US Customary | Metric | |
---|---|---|
Melting Point - Liquidus | 1855 °F | 1012 °C |
Melting Point - Solidus | 1445 °F | 785 °C |
Density | 0.321 lb/in³ at 68 °F3 | 8.89 gm/cm³ at 20 °C |
Specific Gravity | 8.89 | 8.89 |
Electrical Conductivity | 14.5% IACS at 68 °F | 0.084 MegaSiemens/cm at 20 °C |
Thermal Conductivity | 38.0 Btu/sq ft/ft hr/°F at 68 °F | 65.8 W/m at 20 °C |
Coefficient of Thermal Expansion 68-392 | 10 · 10-6 per °F (68-392 °F) | 17.3 · 10-6 per °C (20-200 °C) |
Specific Heat Capacity | 0.093 Btu/lb/°F at 68 °F | 389.6 J/kg at 20 °C |
Modulus of Elastic in Tension | 16900 ksi | 116522 MPa |
Fabrication Properties
Technique | Suitability |
---|---|
Soldering | Excellent |
Brazing | Good |
Oxyacetylene Welding | Not Recommended |
Gas Shielded Arc Welding | Not Recommended |
Coated Metal Arc Welding | Not Recommended |
Machinability Rating | 70 |
Fabrication Properties provided by CDA