Cast C95510
Randall Bearings produces AMS 4880-C95510 alloy as a standard-stocked aluminum bronze alloy with over 40 of the most popular sizes in stock. The alloy properties of AMS 4880-C95510 make it appropriate for application in several industries including aircraft and aerospace as well as oil and gas. Randall Bearings also produces c95400, c95500 and c95900 aluminum bronze alloys as standard-stocked products.
Information
Product description: Nickel-Aluminum bronze
Solids: 1/2" to 9" O.D.
Tubes: 1 1/8" to 13" O.D.
Rectangles: Up to 15”
Standard lengths: 24”
Shape/Form: semi-finished, mill stock or near-net shapes, anode, bar stock, billet/bloom, squares, hex, plate, profile or structural shape, flats/rectangular bar
*Consult mill for other lengths
Typical uses
Industrial: bearings requiring abrasion resistance/good ductility/retention of hardness at moderate temperatures, bushings, hydraulic seal components, landing gear bushings and bearings
Similar or equivalent specification
| CDA | ASTM | SAE | AMS | Federal | Military | Other |
|---|---|---|---|---|---|---|
| C95510 | J461 J462 | 4880 |
Chemical composition
| Cu% | Sn% | Zn% | Fe% | Ni%1 | Al% | Mn% |
|---|---|---|---|---|---|---|
| 78.00 min | 0.20 | 0.30 | 2.00-3.50 | 4.50-5.50 | 9.70-10.90 | 1.50 |
Chemical composition according to AMS 4880
¹Ni value includes Co.
Note: Cu + sum of named elements, 99.8% min. Unless otherwise noted, single values represent maximums.
Machinability
| Copper alloy UNS no. | Machinability rating | Density (lb / in³ at 68°F) |
|---|---|---|
| C95510 | 50 | 0.272 |
Mechanical properties
| Tensile strength, min | Yield Strength, at 0.2% Offset, min | Elongation, in 4D, min | Brinell hardness | Remarks | ||
|---|---|---|---|---|---|---|
| ksi | MPa | ksi | MPa | % | min to max BHN | |
| 105.0 | 724 | 62.5 | 431 | 9 | 192 to 248 | Castings <4.0, Heat Treated |
| 95.0 | 655 | 56.0 | 386 | 9 | 192 to 248 | Castings 4.0+, Heat Treated |
Mechanical properties according to AMS 4880